Journal article
Biodegradable Fe-based alloys for use in osteosynthesis: outcome of an in vivo study after 52 weeks.
-
Kraus T
Department of Paediatric Orthopaedics, Medical University Graz, 8036 Graz, Austria.
-
Moszner F
Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich, 8093 Zurich, Switzerland.
-
Fischerauer S
Department of Orthopaedics, Medical University Graz, 8036 Graz, Austria.
-
Fiedler M
Department of Orthopaedics, Medical University Graz, 8036 Graz, Austria.
-
Martinelli E
Department of Orthopaedics, Medical University Graz, 8036 Graz, Austria.
-
Eichler J
Department of Orthopaedics, Medical University Graz, 8036 Graz, Austria.
-
Witte F
Julius Wolff Institut, Charité-Universitätsmedizin Berlin, Augustenburgerplatz 1, 13353 Berlin, Germany.
-
Willbold E
Laboratory for Biomechanics and Biomaterials, Department of Orthopaedic Surgery, Hannover Medical School, Anna-von-Borries-Straße 1-7, 30625 Hannover, Germany.
-
Schinhammer M
Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich, 8093 Zurich, Switzerland.
-
Meischel M
University of Natural Resources and Life Sciences (BOKU), Peter-Jordan Strasse 82, A-1190 Vienna, Austria.
-
Uggowitzer PJ
Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich, 8093 Zurich, Switzerland.
-
Löffler JF
Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich, 8093 Zurich, Switzerland.
-
Weinberg A
Department of Orthopaedics, Medical University Graz, 8036 Graz, Austria. Electronic address: annelie.weinberg@t-online.de.
Show more…
Published in:
- Acta biomaterialia. - 2014
English
This study investigates the degradation performance of three Fe-based materials in a growing rat skeleton over a period of 1 year. Pins of pure Fe and two Fe-based alloys (Fe-10 Mn-1Pd and Fe-21 Mn-0.7C-1Pd, in wt.%) were implanted transcortically into the femur of 38 Sprague-Dawley rats and inspected after 4, 12, 24 and 52 weeks. The assessment was performed by ex vivo microfocus computed tomography, weight-loss determination, surface analysis of the explanted pins and histological examination. The materials investigated showed signs of degradation; however, the degradation proceeded rather slowly and no significant differences between the materials were detected. We discuss these unexpected findings on the basis of fundamental considerations regarding iron corrosion. Dense layers of degradation products were formed on the implants' surfaces, and act as barriers against oxygen transport. For the degradation of iron, however, the presence of oxygen is an indispensable prerequisite. Its availability is generally a critical factor in bony tissue and rather limited there, i.e. in the vicinity of our implants. Because of the relatively slow degradation of both pure Fe and the Fe-based alloys, their suitability for bulk temporary implants such as those in osteosynthesis applications appears questionable.
-
Language
-
-
Open access status
-
closed
-
Identifiers
-
-
Persistent URL
-
https://sonar.ch/global/documents/184115
Statistics
Document views: 50
File downloads: